Support Rollers With Flange Rings With An Inner Ring

Contact Now

Support Rollers without flange rings are designed for applications where associated components limit axial movement of the outer ring. Based on needle roller bearings, these support rollers are available with or without an inner ring. Support rollers with an inner ring have an inner ring that is slightly wider than the outer ring to avoid axial clamping of the outer ring. Support rollers without an inner ring are intended for arrangements where the pin or shaft is hardened and ground.

Support rollers (yoke-type track rollers) are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc.. They are based on needle or cylindrical roller bearings. SKF supplies them ready-to-mount. They are available in several designs and variants:

30 mm x 62 mm x 29 mm skf NATR 30 X Support rollers with flange rings with an inner ring

23,6 mm 13,5 kN
0,3 mm 28

5 mm x 16 mm x 12 mm skf NATV 5 PPA Support rollers with flange rings with an inner ring

150 73
0,25 1200 kN

20 mm x 47 mm x 25 mm skf NATR 20 PPXA Support rollers with flange rings with an inner ring

35 mm 35
20 mm x 47 mm x 25 mm 4200 r/min

45 mm x 100 mm x 32 mm skf PWTR 45100.2RS Support rollers with flange rings with an inner ring

26,99 mm SIGMA
45 mm x 100 mm x 32 mm 50,8

15 mm x 35 mm x 19 mm skf NATR 15 X Support rollers with flange rings with an inner ring

105 SKF
125 mm 450 kN

15 mm x 35 mm x 19 mm skf NUTR 15 A Support rollers with flange rings with an inner ring

12,6 kN 15 000 r/min
3,35 kN 45,5 mm

40 mm x 90 mm x 32 mm skf NUTR 4090 X Support rollers with flange rings with an inner ring

40 mm x 90 mm x 32 mm 24000 r/min
0,6 mm 12
1/13